fbinsttool(U盘万能启动制作工具)v1.701 绿色版
资源介绍
软件介绍
FbinstTool其实就是网络上各种u盘启动盘制作工具的核心,大家都是基于它开发的外壳,其实你有自己的fba格式winpe启动镜像的话直接可以用此工具制作hdd或者zip启动到U盘里,也可以用此工具修改其他人的fba启动镜像为适合自己使用的。
新版本支持独立文件大于4G的UD做到U盘里启动。
fbinsttool使用教程
1、插入U盘,提前备份好数据,因为格式化会清除U盘所有数据的。
2、菜单中选格式化,选强行格式化(第一次使用),分区大小是你要保存在隐藏分区中文件所需的大小。
3、格式化很快就完成了。最好弹出一次U盘,再插入就可以正常使用了。
4、分区中的隐藏文件可以用自己的iso文件,也可以去下载一些做好的PE。
5、软件支持多种引导。要是新手的话,建议直接去无忧下载一个做好的fba文件,菜单里选从文件恢复数据就行了。
部分FbinstTool命令:
Commands:
format Format disk
--raw,-r Format with normal layout (not bootable)
--force,-f Force the creation of data partition
--zip,-z Format as USB-ZIP
--fat16 Format data partition as FAT16
--fat32 Format data partition as FAT32
--align,-a Align to cluster boundary
--nalign,-n NUM NAND alignment
--unit-size,-u NUM Unit size for FAT16/FAT32 in sectors
--base,-b NUM Set base boot sector
--size,-s NUM Set size of data partition
--primary,-p NUM Set primary data size
--extended,-e NUM Set extended data size
--list-size,-l NUM Set size of file list
--max-sectors NUM Set maximum number of sectors per read
--chs Force chs mode
--archive FILE Initialize fb using archive file
restore Try to restore fb mbr
update Update boot code
sync Synchronize disk information
--copy-bpb Copy bpb from the first partition
--reset-bpb Reset bpb to inital state